Glk 250 cdiX204 (2012). All key lost! I programmed KeylessGo but work as a ordinary key. I used 41 rom, key CGDI Keyless. Does anyone know what the problem is? Answer: What keyless key you are using? The old type… Continue Reading
Question: Is it possible to use CGDI MB to add a key ON CAR (without removing EIS) to W204 when there is no key available? Somebody even tried that? Answer: Of course ! But need to spend an hour to collect data… Continue Reading
Car model and year: Range Rover 2019 Purpose: Universal Key to program Key programmer options : Lonsdor K518: Yes, 100% ok with extra Lonsdor Smart key Autel IM608: need dismantle kvm. Yanhua Mini ACDP How to operate? Option 1, Lonsdor K518 100% work… Continue Reading
One user has problem to read and write edc16cp31 with fetrotech ecu programmer, have three tries with three different cars and all three don’t work put X on mb 16cp31 (shown as below). Solution: Use this top pinout, pay attention to the gpt… Continue Reading
Feedback: problem with Pcmtuner ecu programmer, it often disconnects, I changed my usb cable still the same, it says “Unable to use selected interface J2534 Scanmatik SM2 USB” shown as below. Possible reason and solution: It will do this if using some… Continue Reading
New PCMtuner ECU Chip Tuning Tool offline version from obd2gate.com is able to read and write vehicle engine control system (ECU) for most car models on the market covering cars from Europe, Japan, America and Chinese, also it can read and write… Continue Reading
Interested in PCMTuner or Fetrotech Tool or dFlash? Have no idea which one is the best? PCR2.1 reading and writting, which is best? – PCMtuner (PCMflash 1.20) does simos 8.x in obd, but for PCR2.1, it needs unlocked first in BSL to enable OBD… Continue Reading
obd2gate engineer gather some PCMTuner test reports and troubleshooting (issues and solutions). PCMtuner read and write DCM 3.7 via OBD successfully, EGR OFF was done in the soft. PCMtuner can read Renault Logan CU EMS 3120 in the car with key due to immob instead… Continue Reading
Buy ECUHELP kt200 ECU Programmer or pcm tuner? Listen to ECU tuners’ review: Many professional tuners have clones for when original tool software updates kill ecu’s – Even a new tool like Kess3 have many failures I think people over look the… Continue Reading
KT200 ECU Programmer Siemens SIM2K-140/141/341/D160 on the desktop (large connector) : 1,3,5 – ECU Ground (just connect one of the contacts) 77 – CAN-High 78 – CAN-Low 76 – K-Line 2 – + 12V (ignition on) 4 – + 12V (main… Continue Reading
