One customer said, “I used a Lishi to decode a 2017 Ford Explorer lock, then my Xhorse Dolphin XP005L skips 2016-2018, so I chose the 2019 key. Pins 1-4 were missing, so I set them as 1, and Cut key doesn’t… Continue Reading
A customer reported that he has a Xhorse Dolphin2 XP005L and asked if it’s normal for the 1mm tracer to break that easily. He has already calibrated the key cutting machine but was unlucky in two jobs where four tracers broke – two in each job… Continue Reading
In this Xhorse blog, we’ve put together a list of common error codes for Xhorse Dolphin 2 XP005L, along with the solutions. Error codes on XP005l ERROR CODE: 84 ERROR CODE: Params error nation code ERROR CODE: 5 ERROR CODE: 6… Continue Reading
Feedback from a customer: My Xhorse Dolphin 2 XP-005L doesn’t cut deep enough. I recently cut a key which operates in the lock, however, it encounters difficulty when being inserted into the lock. Upon comparing it to other high-security keys, it appears… Continue Reading
A customer said that his Dolphin XP005L Xhorse key cutting machine cannot cut the emergency key blade Toy48 for a 2017 Auris. What can be done in this situation? Here are some solutions provided by OBD2GATE.com: You need key code. Take out the… Continue Reading
A customer inquired, “I recently bought Xhorse XP005L key cutting machine. The first key cutting went smoothly. Yet, when I attempted to decode another key, the probe suddenly broke. I thoroughly cleaned all components, including the key, and even replaced the probe.… Continue Reading
Note:Use Xhorse Dolphin XP005L alone and use Xhorse Dolphin XP005 with Key Tool Max Pro/smartphone to cut keys,appears “error code 80,device initialize error”as shown in the figures below. obd2gate.com engineer’s suggestion:1.Update firmware, calibrate machine, and try again 2.If not solve,… Continue Reading
