![](https://blog.obd2gate.com/wp-content/uploads/2023/02/Xhorse-Dolphin-xp005-obd2gate2.jpg)
Note:
Use Xhorse Dolphin XP005L alone and use Xhorse Dolphin XP005 with Key Tool Max Pro/smartphone to cut keys,appears “error code 80,device initialize error”as shown in the figures below.
obd2gate.com engineer’s suggestion:
1.Update firmware, calibrate machine, and try again
2.If not solve, go to perform Electrical Conductivity Measurement
Device information>> Electrical conductivity measurement>> follow the on-screen instruction below to test
Use a blank key or any other conductor to connect the probe and clamp/cutter and clamp in sequence to measure
![](https://blog.obd2gate.com/wp-content/uploads/2023/02/Xhorse-Dolphin-xp005-obd2gate3.jpg)
3.If it shows”error 80,device calibration error can’t do universal key duplication”,maybe the dolphin key cutting machine is short-circuited,check if wires are broken or loose.
4.If all methods above still cannot fix the error,it needs to replace the main PCB.
![](https://blog.obd2gate.com/wp-content/uploads/2023/02/Xhorse-Dolphin-xp005-obd2gate4.jpg)
![](https://blog.obd2gate.com/wp-content/uploads/2023/02/Xhorse-Dolphin-xp005-obd2gate5.jpg)
![](https://blog.obd2gate.com/wp-content/uploads/2023/02/Xhorse-Dolphin-xp005-obd2gate6.jpg)
![](https://blog.obd2gate.com/wp-content/uploads/2023/02/Xhorse-Dolphin-xp005-obd2gate7.jpg)
![](https://blog.obd2gate.com/wp-content/uploads/2023/02/Xhorse-Dolphin-xp005-obd2gate8.jpg)
Provide your device SN to yout dealer,if it’s under warranty,and you can apply a new PCB free.