This article will show you how to use the Lonsdor K518ISE Key Programmer to Delete keys in the form of graphic tutorials.
Okay, let’s get started.
Step 1: Please prepare two keys in advance that we want to save, these two keys will stay and the absent keys will be deleted and cannot register again.
Then make sure K518ISE is well connected to the network.
If all the above things are ready, press the” Delete smart key” and “OK” to start.
Step 2: Switch “Ignition” on and tap “Ok” two times, then turn “Ignition” off and “Flashing Light”.
Step 3: Now we choose the first one, “Load PEPS Dflash file to acquire 12-bit PIN”.
Step 4: Here’s the file that Lonsdor K518ISE just packed up, click “OK” to proceed.
Step 5: Keep two keys we just prepared to be saved close to the Ignition switch. Then wait for the buzzer to beep and the progress bar reading to complete.
Ok now, we can see deleting completed and the count of the registered keys is 2 on the Lonsdor K518ISE tablet.