This blog provides step-by-step instructions for locksmiths on how to perform all keys lost for Ford Fusion using Autel IM608 2.
Two blank keys
Two paired keys
Autel MaxiIM IM608 PRO II
Note: you will need at least two paired keys at the end of this process.
If you are performing all keys lost, make sure you have two blank keys to start.
First, plug in the VCI to the OBD2 port located underneath the steering column.
Pair the VCI with IM608 ii in VCI management.
Now that we’re connected, we can tap IMMO>> find the vehicle
Automatically scan the vehicle to get the VIN or manually input the vehicle information.
Make>>area>>model>>year>>key type, smart key
Go to control unit>> tap “keyless system(CAN)”>> tap “key learning”>> then “all smart keys lost”>> tap “OK”
This process will delete all current keys, click”ok”
Confirm that the car alarm is not active, press “no”
Wait up to ten minutes, press “yes” if you want to clear all keys
You will need two keys at the end of this process in order to start the vehicle
Current number of keys is: Erasing successful, tap “ok”
Place the first key to be learned in the key slot in the middle compartment, it will pair instantly.
Take it out. Then place the second key in the compartment.
Once your keys are learned, test them by locking and unlocking the doors and turning on the engine.
So the job is done here, you can click the link below to discover more about Autel IM608 2: