One user feedback, he can’t use ecuhelp KT200 to write flash data for Audi A6, it pops up “Turn the dashboard off and wait” shown as below. Finally, the problem is solved by obd2gate.com engineer. Here is the solution for… Continue Reading
The tips to use ECUHELP KT200 to Read EDC17CP44 Audi A7 on Bench. If KT200 pops up the following errors: Possible reasons:Wrong GPT connection, the S1 and S2 is not connected. Feedback:Finally, ecuhelp kt200 works by following the correct wiring… Continue Reading
Have anyone use KT200 ecu programmer done DCU102 by OBD? Obd2gate.com engineer Answer: Only over boot mode, 2 pins on board. https://www.obd2gate.com/
ECUHELP KT200 is same to FoxFlash or similar? They are similar tools, FoxFlash cloned the first batch of KT200, you will find that foxflash has yellow adapter, and KT200 has already eliminated the first batch, and there is no need… Continue Reading
ECUHELP KT200 ECU Programmer successfully bench read and write EDC17CP45 BMW 3.0 280kw. And Bosch EDC17 CP45 – TC1797 (Bench Tricore)
Question on ECUHELP KT200 ecu programmer VW/Audi with data stored in OTP data area. Looks like there’s an update on the software about reading OTP, how to successfully clone on these ecu’s and cart start? without having to mod files, keeping… Continue Reading
KT200 error “Turn the dashboard off and back on, then wait for 10 sec before continue”. Look at the images below. Solution: Starting from where I started the GREEN ARROW. it’s the 12th pin and not the 11th where you… Continue Reading
Buy ECUHELP kt200 ECU Programmer or pcm tuner? Listen to ECU tuners’ review: Many professional tuners have clones for when original tool software updates kill ecu’s – Even a new tool like Kess3 have many failures I think people over look the… Continue Reading
KT200 ECU Programmer Siemens SIM2K-140/141/341/D160 on the desktop (large connector) : 1,3,5 – ECU Ground (just connect one of the contacts) 77 – CAN-High 78 – CAN-Low 76 – K-Line 2 – + 12V (ignition on) 4 – + 12V (main… Continue Reading
ECUHELP KT200 ECU programmer can perform ECU maintenance chip tuning, DTC code removal, OBD/BOOT/BDM/JTAG, and multiple protocols. And it is the Master version, means it can read and write ECU data, read it in BIN unencrypted format, allows you to modify… Continue Reading
