One user feedback, he can’t use ecuhelp KT200 to write flash data for Audi A6, it pops up “Turn the dashboard off and wait” shown as below. Finally, the problem is solved by obd2gate.com engineer. Here is the solution for… Continue Reading
IO-PROG Terminal Multi Tool ECU Programmer for reading and writing GM / Opel. Add Opel ECU E84 E98 Reading and Writting compared to the old version. IO-PROG Basic version: for only reading and writing GM / Opel ECU IO-PROG Advanced version:… Continue Reading
2012 Bentley continental add key with Autel im608 is possible, by obd or has to be on bench, it depends.User feedback: I did it on bench and works perfectly.Just to be sure. Had a hard time cutting the key and… Continue Reading
Here is the key of 2010 VW CC, wanna add a key with Autel IM608 key programmer. How? Tips:Option 1.This year you get a virgin remote with virgin chip from china. Then open new key, take out chip that comes… Continue Reading
The tips to use ECUHELP KT200 to Read EDC17CP44 Audi A7 on Bench. If KT200 pops up the following errors: Possible reasons:Wrong GPT connection, the S1 and S2 is not connected. Feedback:Finally, ecuhelp kt200 works by following the correct wiring… Continue Reading
Have anyone use KT200 ecu programmer done DCU102 by OBD? Obd2gate.com engineer Answer: Only over boot mode, 2 pins on board. https://www.obd2gate.com/
ECUHELP KT200 is same to FoxFlash or similar? They are similar tools, FoxFlash cloned the first batch of KT200, you will find that foxflash has yellow adapter, and KT200 has already eliminated the first batch, and there is no need… Continue Reading
ECUHELP KT200 ECU Programmer successfully bench read and write EDC17CP45 BMW 3.0 280kw. And Bosch EDC17 CP45 – TC1797 (Bench Tricore)
Question on ECUHELP KT200 ecu programmer VW/Audi with data stored in OTP data area. Looks like there’s an update on the software about reading OTP, how to successfully clone on these ecu’s and cart start? without having to mod files, keeping… Continue Reading
KT200 error “Turn the dashboard off and back on, then wait for 10 sec before continue”. Look at the images below. Solution: Starting from where I started the GREEN ARROW. it’s the 12th pin and not the 11th where you… Continue Reading
