Autel IM608 II & APB112 Add New Smart Key for Toyota Corolla OK

Autel MaxiIM IM608 II key programmer and APB112 Smart Key Simulator can work together to add a smart key for Toyota Corolla in less than 2 minutes. Here is the instruction.



A Step-by-Step Procedure:


Step 1: Establish Vehicle Connection

  • Plug in the VCl into the vehicle’s OBDII port.
  • Activate the vehicle’s ignition.


Step 2: Navigate to IMMO and choose vehicle model

  • Press “IMMO” on the main menu of MaxiIM IM608 II
  • Agree to the disclaimer
  • Select the region “Asia,” followed by “Toyota.”
  • Choose “Manual selection,” then “USA,” and further select “COROLLA.”

autel-im608-add-key-toyota-corolla-2.jpg autel-im608-add-key-toyota-corolla-3.jpg

  • Choose the appropriate car year range (e.g., 2017-2018).
  • Opt for “Smart key.”
  • Confirm vehicle profile



Step 3: Add a Smart Key

  • Select “Control Unit,” followed by “Keyless System (CAN),” and choose “Add Smart Key.”


  • Verify the usage of Autel APB112 smart key simulator
  • Activate the hazard warning lamps.


  • Every step must be performed within the designated time frame.
  • A total of 6 learning positions are involved.


  • Position a previously learned smart key near the START button.
  • Successful learning confirmation.

autel-im608-add-key-toyota-corolla-8.jpg autel-im608-add-key-toyota-corolla-9.jpg

Process Completed!

By following these straightforward steps, Autel MaxiIM IM608 II successfully adds a new smart key for Toyota Corolla model.