If you encounter two common errors with your Lonsdor KH100+ device, here are some solutions that you can try.
Error 1: You are unable to connect to a network even though there are several available hotspots.
Error 2: The device gets stuck in an interface for a long time while you are operating it, such as when you are trying to register and it keeps searching for a network or when you turn it on and it takes several minutes to load.
To fix these errors, follow these steps:
Step 1: Download the repaired file for your Lonsdor KH100+ device and extract the two files to your computer desktop.
Step 2: Turn off your Lonsdor KH100+ device and then press and hold the “Down” button for a few seconds. Then, press the “Power” button once to enter the “USB Disk Mode” interface.
Step 3: Connect your device to your computer and transfer the two files to your device.
Step 4: Click “OK” to reboot the device, and you will see a progress bar on the device. The device will update automatically.
Step 5: Check to see if your device is working correctly after the update.